This is a Ferromatik K-Tec 110 moulding machine. It was manufactured in 2004 but has only 6384 hours on the clock as it has been used in a training facility only.
The machine has been used as a conventional machine, but is fitted with a secondary injection unit mounted vertically, so it is twin shot capable.
It is fitted with a shut off nozzle, the plasticising unit is 35mm which gives a shot volume of 134cm3. It has single core pull on the moving side.
The machine is fully operational and can be inspected under power if required. Any purchaser will need to disconnect and arrange removal.
