Yizumi UK

Quick Nav

Enquire Now

Yizumi UK

Yizumi FF Series

Synergy of electric and hydraulic drive.

FF Series Overview

The brand new FF range of hybrid machines combines the benefits of electric drive with the practical features of hydraulic operation, resulting in the perfect blend of efficiency and value. The FF series uses servo motors for absolute accuracy with the combination of hydraulic drive for linear movements, like carriage movements and core pull sequences. Optimising the drive type for each movement gives you a more accurate, efficient and repeatable machine.

Key Standard Features

  • Three servo drives allow multiple parallel movements
  • Servo hydraulics available for double cores, unscrewing, valve gate control, ejector and shut off nozzle
  • Contact free tie bars give improved platen parallelism, reduced energy consumption and a contaminant free moulding area
  • Modular design allows for a large combination of injection units and screws to be chosen for each machine size.  Bespoke customisation of a machine for a particular application is possible.
  • 12-inch colour touchscreen control interface
  • Intelligent mould protection
  • Linear clamp bearings give a cleaner mould area
  • Highly accurate clamp movements with the servo drive control

High standard specification

STV Machinery have worked with Yizumi to customise the FF machines to ensure it’s suitable for highly demanding and medical applications.  The high standard specification includes;

  • Electric Hybrid machine with hydraulic carriage
  • Three servo motors control injection, plasticising, clamping and ejection.  Parallel movements possible.
  • KEBA 2000
  • Hydraulic Double core pull
  • Double air blast
  • Linear bearings on the injection unit and clamp unit give improved alignment, eliminate stiction, reduce lubrication contamination, and offer increased accuracy. 
  • Semi-auto start on flying lead
  • Euromap 67 interface and standard robot mounting holes
  • Choice of change over to holding pressure by position or pressure
  • Anti-vibration mounts
  • Industry 4.0 ready
  • Each machine supplied with small spares package
  • Tool kit to suit machine
  • Automatic mould height adjustment
  • Platen with T-slots, mould mounting holes, and full set of mould clamps
  • Monitored central lubrication system
  • Hydraulic ejector with ejector plate and though holes and quick release coupling
  • Contact free tie bars give improved platen parallelism, reduced energy consumption and a contaminant free moulding area
  • 36-month warranty supported by STV’s in-house engineers

Options to customise to suit the application

In addition to the high specification offered as standard, each FE series machine has a number of available options to tailor the machine to suit individual applications, such as;

  • Bi-metallic plasticising unit (ask us about the grades available to suit your material) 
  • Ejector can be upgraded to electric drive
  • Gas injection interface 
  • Interface for magnetic platens 
  • Interface for mould cavity pressure transducer 
  • Increased maximum mould height option 
  • Injection compression 
  • Shut-off nozzle
  • Infrared heater bands 
  • KEBA controller upgrade options 
  • Turnkey packages including robots & ancillaries 
  • Remote login support for rapid process assistance and fault finding 
  • Integrated hot runner controls 

Technical Information

“This is an important upgrade for us as we have struggled to find the right machine for our specialised production. Yizumi and STV not only understood these requirements, but they have accommodated these bespoke specs and delivered them. Combined with tooling upgrades we are achieving our targets on productivity with a 13-20% improvement and reduced energy costs. Our fourth machine has recently been installed with a major modification to accept our tooling and it’s been running very well.”
Adrian
AdrianOwner
“Our first Yizumi was installed just over two years ago, the reliability of the machine and support from STV Machinery gave us the confidence to purchase six more as part of our ongoing expansion and investment program.”
Nick
NickDirector
"Investment in state-of-the-art manufacturing equipment has been our agenda for a while now. The new machines will enable us to keep pace with the increasing demand for our products and allow us to expand into other new areas. We plan to launch more new products in the coming months. The eight new Yizumi machines will help us do this."
Michael
MichaelManaging Director
"We’ve have a Yizumi UN260A5 and are very happy with the machine. It was put to work instantly on a large project and has performed well on quality and repeatability since day one. The support from STV machinery has been very good and we have now added two additional Yizumi machines to our shop."
Jack
JackMouldshop leader
“Very pleased overall with our purchase of the 400 tonne, STV were on the ball with commissioning as soon as it was offloaded, machine running faultlessly, low power consumption and currently running a tool that previously needed a 500 tonne machine. We’ve now purchased a 60T Yizumi as part of our continued investment”
Geoff
GeoffOwner
"Having already experienced the after sales support STV Machinery provide, our decision to buy a 200 tonne Yizumi machine was not a difficult one. We’ve had the machine since the start of 2018 and have been very happy."
Terry
TerryDirector
"Two Yizumi 200 tonne machines are working well and we've now received a third larger machine. After an initial settling in period, the machine appears to be operating in a very stable and repeatable manner. We have had the machine commissioned and run – up with one of the most challenging moulds we have available and the machine has performed well thus far. The service from STV has been excellent, coming in and getting us operational as quickly as possible."
DanielCEO
Contact Us
© 2025 STV Machinery